Download The Rufus Usb Installer For Maclawyersnew
Universal USB Installer aka UUI is a Live Linux Bootable USB Creator that allows you to choose from a selection of Linux Distributions to put on your USB Flash Drive. The Universal USB Installer is easy to use. Simply choose a Live Linux Distribution, the ISO file, your Flash Drive and, Click Install. Upon completion, you should have a ready to run bootable USB Flash Drive with your select operating system installed. Other features include; Persistence (if available) – Ubuntu, Xubuntu, and Lubuntu Casper Persistence feature works with FAT32 or NTFS formatted drives. Larger than 4GB casper-rw is possible only when the USB drive is formatted with the NTFS filesystem.
NOTE: If you are looking to add multiple Linux Distributions, System Diagnostic Tools, Antivirus Utilities, and Windows Installers to your bootable USB, use YUMI – Multiboot USB Software, instead.
Universal USB Installer (UUI) Screenshots
Universal-USB-Installer-2.0.0.0.exe – December 3, 2020 – Changes
Compile using newer Nullsoft Scriptable Install System Version 3.06.1
Download Rufus for free. Utility to create bootable USB flash drives. Rufus is a standalone app designed to format and create a bootable USB drive for a large variety of ISOs. The app is just over 1MB in size and is notably faster than similar competitor apps such as the Windows 7 USB utility, Universal USB Installer, and UNetbootin. Sep 10, 2019 This article will advise how to download Ubuntu 18.04 LTS, use Rufus to make a bootable USB drive from WIndows, and install Ubuntu 18.04 LTS on your PC. Downloading 'Ubuntu 18.04 LTS' ISO image Go to the official website of Ubuntu at from any Web Browser ( Microsoft Edge is used in screenshots ).
SHA-256: F8EF9425682CC2824E9163A3BB07D8620A8C90298E6D7CB91446D37113CD90BE
IMPORTANT: The Windows to Go option requires the USB be formatted NTFS with 20GB free disk space to hold the virtual disk. See FAQ for more info.
IMPORTANT NOTE: Your USB drive must be Fat32/NTFS formatted, otherwise Syslinux will fail and your drive will NOT Boot.
Bootable USB Flash Drive Creation Requirements:
You should use a –> Fast SSD Flash Drive with UUI
- Universal-USB-Installer-2.0.0.0.exe
- Windows Vista/7/8/10 to create the USB
- *Fat32 or NTFS Formatted Flash Drive. MBR partition table
- PC with a BIOS that can boot from USB
- Your Favorite Linux ISO
Feel free to inform me of unlisted Live Linux distributions or version revisions, and I will do my best to update Universal USB Installer (UUI) to support them.
Universal USB Installer Recent Changelog:
12/03/20 – Version 2.0.0.0: Recompile using newer Nullsoft Scriptable Install System Version 3.06.1
11/29/20 – Version 1.9.9.9: Switched to create Ubuntu/Linux-Mint persistence file and label based on the name of the ISO. Supports persistence for Linux Mint/Ubuntu version 16 through 20+. Added a Sleep timer to pause between file creation and ext2 format so that persistent file creation can be performed on the USB.
11/25/20 – Version 1.9.9.8: Added support for old casper-rw label on older Ubuntu and Linux Mint versions. For example, for version 19.10 and below use the Ubuntu 19 (and lower) option. Revert back to creating and formatting the casper writable file on local machine, then moving it to the USB.
11/02/20 – Version 1.9.9.7: Updated to support newer Ubuntu 20.10 and derivitives. Moved casper writable file creation to occur on USB.
10/31/20 – Version 1.9.9.6: Updated several links (still more to check). Add entry for Sergei Strelec.
10/14/20 – Version 1.9.9.5: Removed Try via DD option. Moved Antergos and Mageia entries to use Grub for boot.
10/12/20 – Version 1.9.9.4: Updated to support Puppy Linux Fossapup64. Fixed Try Unlisted ISO (Grub) option. Updated to support newer CentOS installers. You must use an NTFS format on your USB when using the DVD ISO, because it is larger than 4GB.
08/04/20 – Version 1.9.9.3: Fixed broken links for Antergos, EasyPeasy, Xpud, and CubLinux.
07/28/20 – Version 1.9.9.2: Updated to support LinuxFX (aka: Windows FX or WinFX).
07/17/20 – Version 1.9.9.1: Support Ubuntu's 'writable' casper persistence file name.
12/04/19 – Version 1.9.9.0: Updated to support Clear Linux and Pop OS.
09/17/19 – Version 1.9.8.9: Updated to support Skywave Linux, and newer Knoppix. Corrected Ubuntu based persistent conditional statements.
06/01/19 – Version 1.9.8.8: Updated to support newer Archbang, ArchLinux, Manjaro, Dr.Web, and AntiX. Add support for KaOS, Pop OS, Bionic Pup, Emmabuntus, and MX Linux.
02/19/19 – Version 1.9.8.7: Updated to support initrd boot option for newer Ubuntu based distributions when USB drive is formatted NTFS. Added persistence option to Kodachi entry.
UUI can create a Bootable USB containing any of the following:
— Ubuntu 32/64 Bit —
- Ubuntu Desktop
- Xubuntu Desktop
- Kubuntu Desktop
- Lubuntu Desktop
- Edubuntu Desktop
- Ubuntu Studio
- *Ubuntu Server Installer
- **Ubuntu Alternate
- Mythbuntu Desktop
- Blackbuntu
— Linux Mint 32/64 Bit —
- Linux Mint
— Debian Live/Netinst 32/64 Bit —
- Debian Netinst
- *Debian Live
— Backtrack/Kali Versions —
- Kali Linux
- Backtrack
— Fedora 32/64 Bit —
- Fedora Desktop
— OpenSUSE 32/64 Bit —
- OpenSUSE 32bit
- *OpenSUSE 64bit
— Puppy Linux Based —
- Fatdog64
- Lighthouse Puppy
- Lucid Puppy
- Precise Puppy
- Puppy Arcade
- Puppy 4.3.1
- Racy Puppy
- Slacko Puppy
- Wary Puppy
— Linux Distros for Kids —
- DouDouLinux
- Qimo 4 Kids 2.0
- Sugar on a Stick
— Other Distros Alphabetical —
- AOMEI (Disk Cloning and Backup Tool)
- Acronis Rescue CD
- Android
- AntiX
- Antergos
- ArchBang
- ArchLinux
- ArtistX
- Aurora
- BackBox
- Baltix Linux
- BCCD
- BlehOS
- Bodhi
- Boot Repair Disk
- Carmedia
- CentOS
- Chakra
- Clonezilla
- Crunchbang
- DBAN 2.2.X
- Deft Linux
- Deepin Linux
- DRBL
- DSL 4.4.10
- Dreamlinux
- Dynebolic
- EASUS Disk Copy
- EasyPeasy
- Elementary OS
- Elementary Unleashed
- Feather Linux
- Finnix
- Fuduntu
- Fusion Linux
- Gamedrift
- Gentoo
- GEEXBOX
- gNewSense
- GRML
- gOS gadgets
- GParted
- Jolicloud
- Kiwi
- KNOPPIX
- Kororaa
- KXStudio
- Leeenux
- Liberte
- LinHES
- Linux XP Like
- LPS
- Macbuntu
- Mandriva One 2011
- Matriux
- MCNLive Toronto
- Meego
- MicroCore
- Netrunner
- Ophcrack
- OSGeo Live
- Pardus
- PartedMagic
- PCLinuxOS
- Pear OS
- Peppermint
- PING
- Pinguy OS
- Plasma active
- PLoP Linux
- Porteus
- Redo Backup
- Rescatux
- RIP Linux
- Runt Linux
- Sabayon Linux
- SalineOS
- Satux
- Simply MEPIS
- SLAX
- SliTaZ
- Sn0wL1nuX
- SolusOS
- System Rescue CD
- Tails
- Terralinux
- TinyCore
- Trisquel
- Uberstudent
- Ultimate Boot CD
- Ultimate Edition
- WifiWay
- WifiSlax
- xPUD
- XBMC
- XBMCbuntu
- StartOS
- wattOS R5
- Zenwalk Live
- Zorin OS
— Live Antivirus Rescue CDs —
- AOSS (Malware Scanner)
- AVG Rescue CD
- Avira Antivir Rescue Disk
- Bitdefender Rescue CD
- Comodo Rescue Disk
- DrWeb LiveCD
- F-Secure Rescue CD
- G DATA Antivirus
- Kaspersky Rescue Disk
- Panda Safe CD
- Trinity Rescue Kit
— Other Software —
- Falcon 4 Boot CD
- Hiren's Boot CD
- Kon-Boot
- Sergei Strelec
— Windows to Go + Windows Installers —
- Windows to Go (on VHD)
- *Windows Vista Installer
- **Windows 7 Installer
- ***Windows 8 Installer
— Try to use an Unsupported ISO —
- Try Unlisted Linux ISO
More Live Linux Distributions will be added as time permits. Feel free to contact me to submit recommendations.
UUI – Universal USB Installer Troubleshooting, Issues, Bugs:
The Windows to Go option requires the USB drive be NTFS formatted and have 20GB+ free space to hold the virtual disk. Many flash drives you might find at local department stores won't be fast enough. You'll need a Very Fast Flash Drive. When Windows boots from the USB for the first time, it'll go through the setup process and then reboot. You'll need to boot using your Windows to Go flash drive a second time to finalize the setup process and finally boot into your full Portable Windows.
UUI Expects the Volume Label of your USB drive to be UUI in order for OpenSUSE, CentOS and several other distributions to boot. UUI attempts to automatically create this Volume Label, however it can sometimes fail. Please ensure that the Volume Label of your USB remains UUI if you expect distributions to boot!
Persistence feature is currently broken with Newer Debian and Debian based distributions due to significant changes upstream. Debian now requires a rename of the persistent block file and label from live-rw to persistence and must hold a persistence.conf file containing / Union. I will be working on making the necessary changes to provide a fix as time allows.
If you're using Universal-USB-Installer-2.0.0.0.exe and you still receive Insane primary (MBR) partition notices,
Insane primary (MBR) partition. Can’t find myself on the drive I booted from
Your USB drive may be improperly formatted, contains more than one partition or MBR, or your BIOS is not properly detecting the USB drive and its firmware needs to be updated. You can try these methods to Format and Restore your USB Drive
An Error (1) occurred while executing syslinux.
If you encounter a message stating
An error (1) occurred while executing syslinux. Your USB drive won't be bootable.
The most likely cause is that your USB drive is formatted as exFAT or some other unsupported format. You'll need to reformat as fat32 (currently preferred) or NTFS.
My PC wont Boot from my Flash Drive, but supports USB boot!
Many Flash Drives ship USB-FDD formatted and some systems will not detect or even boot USB-FDD. I have found that most systems can however boot USB-ZIP, and or USB-HDD. If you are having a hard time getting your BIOS to detect your flash drive, you can try to format it as USB-HDD or USB-ZIP using BOOTICE (GET IT HERE), and then proceed to use Universal USB Installer to put your chosen Distro on USB.
OTHER IMPORTANT NOTES:
- If you're running a Windows Vista or 7 Installer from your USB, after the first reboot, remove the flash drive and let the pc complete from the hard disk.
- When browsing for an ISO, UUI will only display ISO Files that match exactly what the tool is asking for. For example, if you chose to install Ubuntu 10.10 Desktop i386, you should not expect the tool to display your ubuntu-10.10-netbook-i386.iso as you have not chosen to install the netbook variant.
Auto Detection: If you run Universal USB Installer from the same directory containing an installable ISO, the script should Auto Detect the ISO and bypass step 2.
* Although you can use an NTFS formatted USB, Ubuntu based 'persistence' features will only work with a Fat16 or Fat32 formatted drive. Additionally some Linux Distributions will not boot from an NTFS formatted USB.
This tool does not support adding, installing, and booting from multiple Linux Distributions. Only One Distribution can be installed per USB drive. However the YUMI Multiboot USB Creator can be used to create a Multi System USB Device.
To try an ISO that isn't listed, simply choose one of the the last three options in Step 1. I recommend 'Try Unlisted Linux ISO (GRUB)' because it seems to be the most successful. Please inform me of any unlisted 'Linux ISOs' you get to work via these options, and I'll make a note to add them to the list.
NOTE: OpenSUSE DVD ISOs that exceed 4GB will not work due to the Fat32 limitation.
Ubuntu Server 'Failed to copy file from CD-ROM' Error (should currently be resolved)?
The Universal USB Installer should run from within Linux using WINE. However, the Fat32 format option does not work. Additionally, Syslinux must be manually installed onto the USB when using UUI.
Universal USB Installer – Easy as 1 2 3 published under Bootable USB Creator Software
It has become very common for people nowadays to use handy USB flash drives rather than the traditional CD-ROM or DVD drives to install an operating system to your computer or laptop. Rufus, which is a free software, has made everything easy for us. Rufus is a free tool that allows us to create bootable USB flash drives that makes it easier for everyone when installing an operating system to a computer or laptop. Gone are the days of the floppy disk drives or CD-ROMS or DVD drives and now it just comes in very handy with a USB flash drive. Here is the list of the things that you would definitely love about this magical software:
- It is totally free! You don’t have to spend a single penny to use this.
- It’s just a small size. So, that’s another thing for you not to worry about.
- It is fast and furious! It can run about twice as fast as other tools available out there!
- 32 bit or 64 bit? Windows 10 or the older ones? Whichever you have, Rufus gets the work done!
So, are you as excited as I am? I hope you do. This may sound a little bit too techy but even beginners can get this done!
With all the available operating systems in the market, Linux has also stood out for the following features:
- It is an open source operating system. Getting the source code is pretty easy.
- It is more secured. It’s more about trusting the operating system than the Anti-virus programs!
- Not everyone has the latest computer systems, and Linux doesn’t care. It’s flexible in a way that it can still be used for your older computer systems.
- Reboot is the key. No need to re-install. Save more time with a faster and better system.
How about we start something magical with these two tools that we have!
Step 1: Head over to Rufus’ official website at https://rufus.ie/
Step 2: Download the software… It’s FREE!
- Once you’re on their official website, scroll down a little and you will see the Downloads It’s always better to have the latest version so just click on whatever’s displayed first to start the download.
As of now, the latest version available is Rufus 3.8 which was updated last September 16, 2019. After a few seconds this should finish downloading.
Step 3: Open Rufus
- Just go to your Downloads folder
- Search for the Rufus software that you just downloaded
- Right click on the file and choose “Run as Administrator”
- Click “Yes” when the message “Do you want to allow this app to make changes to your device?” pops up
Yes! There is no need to install the software on your computer or laptop to be able to use it.
Step 4: Grab your USB flash drive and plug it in
Once the USB flash drive is plugged into your computer or laptop, the Rufus software will be able to detect your device and if you take a look at the bottom part, it should say “1 device found”.
Just a reminder: For this to work, your USB flash drive should have a minimum of 4GB of storage or may vary depending on the Linux distribution that you wish to download.
P.S.
Keep in mind that all the files inside the USB flash drive will be deleted. So make sure to transfer or back up those files if you still need it.
Step 5: Download the Linux Operating System
- You can download it on their website: https://www.linux.org/pages/download/
Step 6:Choose the device
This should display the name of the USB flash drive that you are going to use to create a Linux bootable USB. If in any case you have more than one USB flash drive plugged into your laptop or computer, make sure to select the correct device that you are going to use.
Step 7: Boot Selection
- Select “Disk or ISO image” as pre-selected
- Click the “SELECT” button to choose the Linux ISO file from your computer or laptop – which is the one that you just have downloaded earlier
Step 8: Image Option
- You can just go ahead and leave it with the default option which is the Standard Windows Installation
Step 9:Partition Scheme
- Usually, the default option should work fine. So, the tool will pre-select the option that is suitable for the partition scheme of your computer or laptop.
But in case you would like to know how to identify your computer or laptop’s partition scheme, here’s how:
- Type “Create and format hard disk partitions” on the search bar
- Right click on the Disk. Choose the disk where your Windows is currently installed
- Go to Properties
- Then Volumes
- Look for “Partition Style”
- Then it shows whether you have a GPT or MBR
Step 10: Target System
- You can just go ahead and leave it with the default option.
With the GPT partition scheme, it has pre-selected UEFI (non CSM). UEFI stands for Unified Extensible Firmware Interface.
Step 11: Volume Label
- Label it as you wish
Step 12: File System Type
- Choose FAT32 for the File System Type
Step 13: Cluster Size
- Choose 4096 bytes (Default)
Download The Rufus Usb Installer For Mac Lawyers New Jersey
Step 14: Start creating a Linux bootable USB flash drive
- Go ahead and click START
A message will pop-up telling you that you need newer SysLinux files. You don’t have to worry about this, Rufus got you! Rufus will do the work for you so once you see the pop-up message:
- Go ahead and click “Yes”
- Rufus will then start the download for the newer SysLinux files
You will then be asked by Rufus about how you want to write the image:
Universal Usb Installer For Mac
- Just go ahead and choose “Write in ISO Image Mode (Recommended)”
- Then click “Okay”
You will then see a warning message, letting you know that all the data stored in your USB flash drive will be erased:
- Go ahead and click “Okay”
Rufus will then start creating a Linux Bootable USB flash drive for you!